PDA

View Full Version : [Dillon] Dillon Super Swage 600 setup

creophus
07-29-2008, 08:29 AM
An awesome GP member is loaning me his Super Swage 600 to process a bunch of 223 brass.

I have a question on setup. Should I mount the swage so that the lever can go parallel to the table, or mount it to the end of the table so the handle can go past the horizontal plane to the full range of motion of the lever?

Middle of the work bench or on the very corner?
freakshow10mm
07-29-2008, 08:32 AM
I had mine on the end on the bench so I got the full range of motion. Hand clearance.
creophus
07-29-2008, 08:33 AM
Awesome. Thanks for the quick reply!
BigSlick
07-29-2008, 08:47 AM
I mount mine on a piece of 2x4 clamped to the bench.

Gives ya some hand clearance and keep from having to drill holes.

Also, get one of ANeat's balls for it, work like a champ
creophus
07-29-2008, 08:50 AM
Thanks Slick, but this is a borrowed piece, so I'll not go modifying it in any way.
Charly
07-30-2008, 02:02 AM
is the Aneat Ball also good for the 600 swage ?
that is a new perspective for me because I am using a alu roll handle on the press and could not find a reason to have an Aneat ball.
BigSlick
07-30-2008, 04:19 AM
Works great and fits perfectly
FireCop203
07-30-2008, 06:33 PM
I mount mine on a piece of 2x4 clamped to the bench.

Gives ya some hand clearance and keep from having to drill holes.

Also, get one of ANeat's balls for it, work like a champ

Do you have any information about "ANeats" products?

Is there a website? I'm always looking for a better way to process the primer pockets.
lcarreau
07-30-2008, 06:47 PM
I added something a little extra to sort out the ones that needed to be trimmed.

http://i24.photobucket.com/albums/c8/lcarreau/swag002.jpg
BigSlick
07-30-2008, 06:55 PM
Do you have any information about "ANeats" products?

Is there a website? I'm always looking for a better way to process the primer pockets.

Yep, ANeat is a Member here at GP.

He sell his balls thru Freakshowmanufacturing.com

http://www.freakshowbullets.com/product_info.php?products_id=163

Freak is also a Member here ;)

How they got us all in the same cage, I'll never understand :supergrin:
lcarreau
07-30-2008, 07:01 PM
Yep, ANeat is a Member here at GP.

He sell his balls thru Freakshowmanufacturing.com

http://www.freakshowbullets.com/product_info.php?products_id=163

Freak is also a Member here ;)

How they got us all in the same cage, I'll never understand :supergrin:

You have not lived till you have tried Aneat's balls :)