Taurus 94 .22

[RenoF250]

Is there a good way to make a Taurus 94 .22 shoot well? Mine is very stiff, heavy trigger pull etc. Would like it to be smoother. Also would like more substantial grips but it appears that the Hogues are very similar to the factory grips.

[gwalchmai]

I filled the inside of mine with Flitz and dry fired it a few hundred times. It helped but it's still no Smith...

[chewy]

I got a Wolfe Spring kit for my 627 Ti-Tracker. I had a lot of light primer strikes when I got aWolfe kit for it. Turned out I just needed to clip a coil off of the firing pin return spring cuz the extra couild prevented it from full engagin' the primer. Haven't had to do it with the 94 though. Some will clip a coil off of the hammer spring, bit I wouldn't do it with out a spare one handy. But that's just me though.

[gwalchmai]

I had the same results with the Wolff springs. Light strikes and unreliable ignition. Plus I couldn't tell much difference in the trigger pull. I took it off and put it on my 85 and it did well there.