LWD 2 port barrels

[Phunahm]

Does anyone use the LWD 2 port barrels in their Glocks?....I want to get a new barrel for my G21C I like the factory ports but I want to start shooting a ton-O- lead threw it.....But nobody makes and after market barrel will the factory porting specs yet....Any Pics or Suggestion would be appreciated.....
<!-- / message --><!-- sig --> __________________

[WalterGA]

I use and recommend LWD barrels. Used an LWD two-port .400 Cor-Bon barrel in my G30. I don't notice much muzzle flip reduction with ports on an extended barrel. I'd recommend waiting for the LWD barrel with the factory ports or just going with a non-ported LWD barrel.

[sparky241]

i have heard that putting lead through a ported barrel will lead up the ports and shave lead off the bullet. No experience personally but it has been asked before on gt

[Hatman1793]

Also a owner and user of those very nice Lone Wolf barrels. They are tops for the money and the quality.
Don't shoot lead through factory Glock barrels. Replace them with a LWD.
Okay, so, buy a LWD 45acp replacement barrel. Put it in your G21C. Black out on the barrel where the ports should be and then send the barrel to
MagNaPort in Michigan. They can do the porting job for you.
For the cost of anyone else's aftermarket $200.00 barrel, you can get a LWD for under a hun, and MagNaPort for a hun.

[WalterGA]

Also a owner and user of those very nice Lone Wolf barrels. They are tops for the money and the quality.
Don't shoot lead through factory Glock barrels. Replace them with a LWD.
Okay, so, buy a LWD 45acp replacement barrel. Put it in your G21C. Black out on the barrel where the ports should be and then send the barrel to
MagNaPort in Michigan. They can do the porting job for you.
For the cost of anyone else's aftermarket $200.00 barrel, you can get a LWD for under a hun, and MagNaPort for a hun.

I have no idea if the market would be large enough for JR to consider this, but, for those of you who shoot the "c" models, it sure would be nice if JR would start carrying his barrels already-ported, to match up with the factory slide cuts!

[JR]

FYI: Lone Wolf will soon be able to offer Glock factory style porting to any barrel. I figure cost to run about $50. Should be available in 2 weeks or less

Thanks for the plug you guys!
Good to see Walter GA has found his keyboard!
(This is my first post on this site)

www.lonewolfdist.com

[Phunahm]

:hurray::thumbsup: Cant wait!!!!