Anybody want a 9mm 115 grain lee 6 cavity mold

[gokyo]

I have a Lee 6 cavity mold. It makes 115 grain round nose 9mm bullets Mold # from the midway catalog is 476-412. It is a Tumble lube design. It comes with handles. I will send two containers of Liquid Alox

I just bought a saeco mold and it really kicks ass. SO I can not imagine a reason to ever use lee mold again.

Now the down side to the lee mold.
It is made by lee
The handles loosen and threaten to come off.
The sprue plate gets loose and you have to retighten the bolt
The handle for the sprue plate gets loose too.
It has a small ding in it where I smacked it with the handle of a screw driver to get a stuck bullet out.
It uses liquid Alox so there is a lot of smoke when you shoot it.

The good news is
the price
it is made by lee and is backed by a lifetime warranty (maybe)
It makes 6 bullets at one time
It is alluminium so gets up to temp real fast
It supports you being a CRB
Does not need to be sized
Comes with two containers of liquid Alox.


It is all yours for the incredible low price of...
2 mag-pul 223 magazine.
http://www.impactguns.com/store/873750001609.html

I will consider anything else that is worth about 30 bucks. If you have a really good sob story about how you really want to get into casting but are too poor to buy this crummy mold I will consider that to. THough you have to post your sob story.

Would also consider a Flate rate box of wheel weights.

I will pay shipping on the mold to any USA destination.

If price is too high let me know.

[speedracer211]

Well I am a cheap sob and would love to get into casting, but have some 223 brass as trading fodder.

[gokyo]

I like that the 223 idea. Let me see what comes up in the next little bit and I will get back to you on it.

Please PM with what you have.

[SWAMPMASTER]

I have a Lee 6 cavity mold. It makes 115 grain round nose 9mm bullets Mold # from the midway catalog is 476-412. It is a Tumble lube design. It comes with handles. I will send two containers of Liquid Alox

I just bought a saeco mold and it really kicks ass. SO I can not imagine a reason to ever use lee mold again.

Now the down side to the lee mold.
It is made by lee
The handles loosen and threaten to come off.
The sprue plate gets loose and you have to retighten the bolt
The handle for the sprue plate gets loose too.
It has a small ding in it where I smacked it with the handle of a screw driver to get a stuck bullet out.
It uses liquid Alox so there is a lot of smoke when you shoot it.

The good news is
the price
it is made by lee and is backed by a lifetime warranty (maybe)
It makes 6 bullets at one time
It is alluminium so gets up to temp real fast
It supports you being a CRB
Does not need to be sized
Comes with two containers of liquid Alox.


It is all yours for the incredible low price of...
2 mag-pul 223 magazine.
http://www.impactguns.com/store/873750001609.html

I will consider anything else that is worth about 30 bucks. If you have a really good sob story about how you really want to get into casting but are too poor to buy this crummy mold I will consider that to. THough you have to post your sob story.

Would also consider a Flate rate box of wheel weights.

I will pay shipping on the mold to any USA destination.

If price is too high let me know.

Ok here is my sob story. I am a caster and getting more and more when I can. I am out of work lost my job Dec 31 07 First layoff since 1982 my wife lost here job Jan 25 08 in a reduction of workforce so two of us not working, currently not many jobs around here and gas prices are hard to swallow to drive 1 hour each way for a decent job.I dont like Lee moulds so I would rather you send me the New Saeco mould and I think that would really make my day brighter I promise it would get lots of use and a good home, I would send you a box of wheel weights but then what would I have to cast bullets with in the New Saeco Mould I do have a old crappy Leak A MAtic to resize the bullets with holding togather with duct tape and bailing wire. If I ever get on the right track again I will send it back to RCBS for rebuild or replacement :cryin::cryin::cryin::cryin::cryin: Well what say you:treerat:

[jawjaboy]

It be new or used Gok?

[gokyo]

Slightly used It has about 1000 bullets made at this point. It only took the 3 session I used it to know that I wanted a Saeco mould.

[Clicker]

Don't mean to step any toes being a newbie but if the mold is still up for grabs here goes. How about 3 Colt 20 round AR mags? They're old but look decent. Heck I'll toss in one 20 round cheap "Chinese" knock off AR mag too.

[gokyo]

Sorry it is gone.